BASIC PLAYBACK AND RECORDING | EN 15 |
Basic
Playback
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
This VCR can check the tape condition during playback (and recording), and realizes the best possible pictures.
1 Load a cassette
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR.
Do not apply too much pressure when inserting.
● The VCR turns on automatically. |
● The counter is automatically reset to “0:00:00”. |
● If the cassette's record safety tab has been |
POWER
POWER
REC LINK
S VIDEO | VIDEO |
|
|
| DIGITAL TBC/NR | SP | EP |
|
| VCR |
2 JOG dial | |
REW | FF |
– | + |
| |
| PUSH / TURN |
A.DUB
24HR QUICK
PROGRAM
INSERT | REC | PAUSE | STOP/EJECT |
STOP/EJECT
( 7 / 0 )
removed and "REC SAFETY" is set to "ON", |
playback begins automatically. |
2Start playback
Press PLAY ( 3 ).
● Tape speed (SP or EP) is automatically detected. |
● The |
display panel when you play back a tape |
recorded in |
(☞ pg. 40) |
● If “VIDEO CALIBRATION” is set to “ON” |
(default setting: ☞ pg. 37, 38), “VIDEO |
CALIBRATION” appears on the screen, and this |
POWER
1 2 3
2
4 5 6
7 8 9
0 4
VCR checks the tape condition during | |
automatic tracking. |
|
● If the tape ends during playback or | |
search, the cassette indication “ | ” blinks for |
a few seconds and the VCR starts rewinding the | |
tape automatically. |
|
To stop playback
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.
To rewind the tape (when it is not running)
2
REW ( 1 )
1
FF ( Á )
STOP ( 7 )
Press REW ( 1 ) (or turn the JOG dial on the front panel to the left).
To fast-forward the tape (when it is not running)
Press FF ( Á ) (or turn the JOG dial on the front panel to the right).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the
To prohibit operations during playback (Mode Lock)
Press and hold OK on the Remote for more than 5 seconds. "
" and "
" light up on the front display panel (☞ pg. 60). The playback will not be interrupted until the recording end (unrecorded portion) or tape end is reached (☞ pg. 37, 41).
To resume the other operations, press and hold OK on the Remote again for more than 5 seconds.
●When OK is pressed to set Mode Lock, the
tape is not running.
●You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.
Clean the video heads using a dry cleaning cassette —
•Rough, poor picture appears while a tape is played back.
•The picture is unclear or no picture appears.
•“USE CLEANING CASSETTE” appears on the screen (only with “ON SCREEN (PLAY)” set to “ON”: ☞ pg. 37, 39.)
