JVC SR-V10U 18 EN, H Locating beginning of timer, I Adjusting picture condition, Digital TBC/NR

18 EN BASIC PLAYBACK AND RECORDING (cont.)

I

	REW	FF
	PLAY
POWER	–	+

CH– /+

PUSH / TURN

	REC LINK			A.DUB
S VIDEO	VIDEO (MONO)L—AUDIO—R				24HR QUICK
					PROGRAM
	DIGITAL TBC/NR	SP	EP	INSERT
			VCR		REC	PAUSE STOP/EJECT

H

1 2 3

2

4 5 6

7 8 9

0 4

1

REW ( 1 )FF ( Á )

Other Useful functions for playback

●Playback Resume Function

If there is a power outage during normal playback (or Series Playback), the playback will resume automatically when the power is restored to the VCR. (No setting is required for this function.)

●Video Calibration (☞ pg. 38)

When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest- possible pictures.

●Picture Control (☞ pg. 38)

This function helps you to adjust the playback picture quality according to your preference.

●Video Stabilizer (☞ pg. 39)

You can automatically correct vertical vibrations in the picture when playing back unstable recordings made on another VCR.

H Locating beginning of timer

recordings — Instant Review

At the press of a button, you can turn on the VCR, rewind the tape and begin to view the most recent timer- recorded program.

After ensuring that the VCR is turned off and that the timer mode is disengaged, press REVIEW.

●The VCR turns on, and rewinds to the index code indicating the beginning of the last timer-recorded program, then begins playback automatically.

●You can access a program of 2 to 9 index codes away from the current position on the tape. If, for example, you have 5 programs recorded and you want to watch the third one, press REVIEW three times.

●If you want to find the very beginning of the desired program, press REW ( 1) or FF ( Á ) after playback starts.

●If the tape is already rewound when REVIEW is pressed, it will play the tape from the beginning. It will not fast-forward to an index code.

●The Instant Review function will also operate if the VCR is turned on.

I Adjusting picture condition

— Digital TBC/NR

The Digital TBC/NR (Time Base Corrector / Noise Reduction) function removes jitter from fluctuating video signals to deliver a stable picture even with old tapes and rental tapes. The Digital 3-DNR (Noise Reduction) function which cuts noise and reproduces clear pictures is also linked to this function.

We recommend that you use the Digital TBC/NR function when...

—playing back a tape recorded on a camcorder.

—playing back a tape repeatedly used.

—using this VCR as the player for editing.

Press DIGITAL TBC/NR on the front panel so that the DIGITAL TBC/NR lamp lights up.

Each time you press the button, this function turns on and off.

NOTES:

●If you play back a tape recorded under poor TV reception condition, the picture may happen to become more stable with Digital TBC/NR activated.

●If you play back a tape on which certain types of signals (using a PC or some character generators) have been recorded with Digital TBC/NR activated, the playback picture may be distorted. In this case, deactivate Digital TBC/NR.

●Digital TBC/NR and Video Stabilizer (☞ pg. 39) cannot be used at the same time; if you turn on Digital TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be automatically turned “OFF”. Make sure Digital TBC/NR is deactivated when you want to use Video Stabilizer.