65
6 Install the dedicated NIC port card.
(1) Press the release latch of the slot cover opposite the IPMB_6
slot.
The release latch highlighted in the figure below is for
illustration purpose only.
(2) Pull out the slot cover and store it for reassembly later.
Caution: Do not discard the slot cover. If the expansion card is
removed in the future, the slot cover must be reinstalled to
maintain proper system cooling.
(3) Insert the dedicated NIC port card into the selected slot.
Make sure that the card is properly seated.
(4) Press the release latch to secure the card in place.
(5) Connect the card’s LAN cable to the LAN1 connector of the
ARMC/3 module.
7 Observe the post-installation instructions described on page 38.