37
Installation precautions
Before you install any server component, it is recommended that you
read the following sections first. These sections contain important ESD
precautions along with pre-installation and post-installation
procedures.

ESD precautions

Electrostatic discharge (ESD) can damage static-sensitive hardware
components, such as the processor, disk drives, and the system boards.
Always observe the following precautions before you install a server
component:
Do not remove a component from its protective packaging until
you are ready to install it.
Do not touch the component pins, leads, or circuitry.
Components with a Printed Circuit Board (PCB) assembly should
always be laid with the assembly-side down.
Wear a wrist grounding strap and attach it to a metal part of the
server before handling components. If a wrist strap is not
available, maintain contact with the server throughout any
procedure requiring ESD protection.
Keep the work area free of nonconductive materials, such as
ordinary plastic assembly aids and foam packing.