4. INSTALLATION (CONT)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounting plate |
| ||||
and screws |
| foam tape | |||
(optional) |
|
|
|
|
|
|
|
|
|
| |
Note: Mount the sensor near the top of the garage door for best results.
Note: Ensure you straighten up the antenna on the receiver to receive the best possible reception.
5. OPERATION
When the garage door is open, the sensor will send a signal to the receiver. It will beep and the corresponding zone red LED will flash.
If the sensor is set to zone 1, zone 1 red LED on the receiver will flash, and the receiver will emit a continuous “single beep”, i.e. “beep” pause, “beep”, pause….. etc.
If the sensor is set to zone 4, zone 4 red LED will flash, and the receiver will emit a
By the number of beeps emitted by the receiver, user can identify which zone is triggered.
6. BUZZER VOLUME
You can select the buzzer volume by switching the volume switch to “HI” or “LO” position.
The buzzer can be disabled by switching to the “OFF” position.
7. MUTE
When a sensor is triggered for a long period of time, you may stop the buzzer by pressing the mute button. When another signal comes again, you can disable the buzzer for all currently activated sensors by pressing the mute button. The receive will beep again if it receives another signal.
For instance, if you are working on your lawn with the garage door open, you may want to disable the buzzer for this garage door only. Then you can press the “Mute” button after it starts to sound. If any other sensor is triggered, the receiver will sound again.
8. LOSS OF SIGNAL INDICATION
When the battery level on the sensor drops to a certain level, or the sensor is out of the operating range, the receiver will show a “loss of signal” indication. The red LED representing that zone will flash rapidly, i.e. if zone 1 sensor is lost, the zone 1 red LED will flash rapidly.
When the loss of signal indication occurs, move the receiver closer to the corresponding sensor and trigger that sensor. If the red LED stops flashing rapidly, that means the receiver or sensor needs to be relocated. If the “loss of signal” indication persists, replace the battery of that sensor.
9. OTHER HOUSEHOLD ALERT® SENSORS
The Household Alert® receiver can work with up to 4 different sensors: garage door monitor sensors, door / window sensors, water sensors, indoor/outdoor motion sensors, etc. Please visit www.skylinkhome.com or contact us at support@skylinkhome.com for more information of how to fully utilize your Garage Door MonitorTM.
10. WARRANTY
If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required.
11. CUSTOMER SERVICE
If you would like to order Skylink’s products or have difficulty getting them to work, please :
1.visit our FAQ website at www.skylinkhome.com , or
2.email us at support@skylinkhome.com
CAPITAL PROSPECT LTD.
Rm.1303, 13/F, Block B, Veristrong Ind. Centre, 36 AuPuiWan Street, Fo Tan, Hong Kong
Tel: +852
P/N.
