52 Veriton N2110G Service Guide
Jumper SettingThis section explains how to set the jumper for correct configuration of the main board.
Jumpers with more than one pin are numbered. When setting a jumper, ensure that the jumper caps are
placed on the correct pins.
The following illustration shows the location of CMOS1:
The following table shows the settings of the 3-pin Clear CMOS (CMOS1) jumper. Place the jumper cap on
pins 1 and 2 to close or short the jumper. Place the jumper cap on pins 2 and 3 to open or clear the jumper.
Jumper Type Description Setting (default)
CMOS1 3-pin Clear CMOS 1-2: Normal (default)
2-3: Clear CMOS
Before clearing the CMOS,
make sure to turn off the
system.