D-10 User’s Manual
D.2 Touchpad Utility
The touchpad works with most mouse drivers, but the bundled touchpad
driver supports special functions that work uniquely with the touchpad.

D.2.1 Installing the Touchpad Driver

DOS and Windows 3.x
Follow these steps to install the touchpad driver:
1. Insert system utilities disk 2 in the diskette drive.
2. At the DOS prompt, type the following:
C:\> a:\touchpad\inst31 e
3. Follow the screen instructions to complete the installation.
Windows 95
Follow these steps to install the touchpad driver:
1. Click on the Start button and select Settings, Control Panel, then
Mouse to display the Mouse Properties dialog box.
2. Click the General tab, then click the Change button.
3. Click on Have Disk and insert system utilities disk 2 in your floppy
drive. Confirm or correct the file path (e.g., "a:\touchpad"), then click
on OK.
4. Select Synaptics TouchPad and click on OK to copy the driver files.
5. After the files are copied, the Mouse Properties sheet will show the new
device name. Click on Close.
6. The System Settings Change dialog box offers to restart your computer
so the new settings can take effect. Select Yes.