2-8User’s Manual
In this situation, there are four ways to enter suspend mode:
• Press the standby/suspend button ( )If the notebook beeps but does not enter suspend mode after
pressing the standby/suspend button, it means the operating
system does not allow the notebook to enter the power saving
mode.
• Set a value for the System Standby/Suspend Timer in Setup. If thewaiting time specified by this time elapses without any system activity,
the system goes into suspend mode
• Enable the Suspend upon Battery-low parameter in Setup. If a battery-low condition takes place, the notebook enters suspend mode in about
three minutes. See section 2.6.
• Invoked by the operating system power saving modesWhen the notebook enters suspend mode, the whole system does not
consume any power.
To exit system suspend mode, press the power switch ( ).
Do not change any system devices when the notebook is in
suspend mode.
If the notebook is connected to a LAN environment or has a
current modem connection, it does not resume connection
even after the notebook returns to normal operating mode.