Acer P5370W, P1265P, P1165P, P5270, P5260i manual English

35

5	Image is unstable	•	Adjust the "Tracking" to correct it. Refer to the
	or flickering		"Image" section for more information.
		•	Change the display color depth settings on your
			computer.
6	Image has vertical	•	Use "Frequency" to make an adjustment. Refer to
	flickering bar		the "Image" section for more information.
		•	Check and reconfigure the display mode of your
			graphics card to make it compatible with the
			projector.
7	Image is out of	•	Make sure the lens door is slid on.
	focus	•	Adjusts the focus ring on the projector lens.
		•	Make sure the projection screen is within the
			required distance of 3.3 to 39.0 feet (1.0 to 11.9
			meters) from the projector and 3.3 to 32.9 feet (1.0
			to 10.0 meters)(P5370W) from the projector. Refer to
			the "How to Get a Preferred Image Size by Adjusting
			Distance and Zoom" section for more information.
8	Image is stretched	When you play a DVD encoded in anamorphic or 16:9
	when displaying a	aspect ratio you may need to adjust the following
	"widescreen"	settings:
	DVD title	•	If you play an Letterbox(LBX) format DVD title,
			please change the format to Letterbox(LBX) in the
			projector OSD.
		•	If you play a 4:3 format DVD title, please change the
			format to 4:3 in the projector OSD.
		•	If the image is still stretched, you will also need to
			adjust the aspect ratio. Set up the display format to
			16:9 (wide) aspect ratio on your DVD player.
9	Image is too small	•	Adjust the zoom lever on the top of the projector.
	or too large	•	Move the projector closer to or further from the
			screen.
		•	Press "MENU" on the remote control or on the
			control panel. Go to "Image --> Aspect Ratio" and
			try different settings.
10	Image has slanted	•	If possible, reposition the projector so that it is
	sides		centered on the screen.
		•	Press the "Keystone / " button on the control
			panel or press the "Keystone / / / " on the
			remote control until the sides are vertical.
11	Image is reversed	•	Select "Image --> Projection" on the OSD and adjust
			the projection direction.

English