Attaching / Removing the Base, EN-6 | Acer P206HLxbd specification

Attaching / Removing the Base

--------------------------------------------------------------------

Note: Remove the monitor and monitor base from its packaging. Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen.

Install:

Align the base with the stand and push the base towards the top of the monitor.

Remove:

Depress the release hooks as indi- cated first before removing the base and follow the arrow direction to remove it.

SCREEN POSITION ADJUSTMENT

In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below.

The monitor can be adjusted to 15 degrees up or 5 degrees down as indi- cated by arrow below.

EN-6

Page 7

Image 7

Acer P206HLxbd manual Attaching / Removing the Base, Screen Position Adjustment, EN-6

Contents

Table of Contents EN-1 Special Notes on LCD Monitors EN-2 Information for your safety and comfortSafety instructions Safe listening Finding your comfort zone Product servicingLCD Pixel Statement Tips and information for comfortable use Developing good work habits Taking care of your visionEN-4 EN-5 Unpacking Attaching / Removing the Base Screen Position AdjustmentEN-6 EN-7 Connecting the Power CordSafety Precaution Cleaning Your Monitor Blue Power savingDDC Light Ground DDC-Serial Clock Connector PIN AssignmentPin Color Display Signal Cable Ground EN-10 EN-11 Standard Timing Table EN-12 Installation EN-13 EN-14 Acer eColor Management Operation instructions EN-15 Adjusting the OSD settings EN-16 EN-17 EN-18 EN-19 Troubleshooting EN-20 DVI mode EN-21 Declaration of Conformity EN-22 Federal Communications Commission Declaration of Conformity