EQUALIZER | EXTERNAL AUDIO SOURCES |
Adjusting the spectrometer
The spectrometer in the display uses symbols to temporarily indicate what adjustments are made to the volume, the tone and balance/fader and the equalizer settings.
If no adjustments are being made to the system, the spectrometer displays the output level of the car radio.
You can select the type of spectrome- ter you want displayed in the menu. There are two different types available.
Selecting the spectrometer type
➮Press MENU 8.
“MENU” will appear in the display.
➮Press 
:repeatedly until “EQ DISPLAY” appears in the display.
➮Press
or
:to select either “SPECTRUM 1”, “SPECTRUM 2” or “EQ DISP OFF”.
➮Once you have completed adjust- ing the settings, press MENU 8 or OK ;.
External audio sources
In addition to the CD changer it is also possible to connect another external au- dio source to the line output. These sources can include a portable CD play- er, MiniDisc player or MP3 player.
If you have not connected a CD chang- er, it is possible to connect two external audio sources.
You must activate the AUX output in the menu.
If you would like to connect another ex- ternal audio source, you will require an adapter cable. This adapter cable can be ordered from any authorized Blau- punkt dealer.
Switching the AUX output on/off
➮Press MENU 8.
“MENU” will appear in the display.
➮Press 
:repeatedly until “AUX-
In place of the “1”, there is a “2” for the second AUX input. If you have connect- ed a CD changer, then only AUX “2” can be selected.
➮Press
or
:to switch AUX on or off.
➮Once you have completed your selections, press MENU 8 or OK ;.
Note:
If the AUX input has been switched ON, you can select it by pressing CD•C ?.
52
