CD PLAYER OPERATION
CD player operation
The CD player in this car audio system can be used to play conventional music CDs with a diameter of 12 cm.
Danger of damage to the CD player!
CD singles with a diameter of 8 cm and contour CDs (shape CDs) are not suitable for use with this CD play- er.
We assume no liability for any dam- age done to the CD player resulting from the use of unsuitable CDs.
Starting CD player operation
●If there is no CD in the player,
➮press 
9.
The flip release panel will open.
➮Insert a CD into the player with the label facing up until you feel slight resistance. Do not use force.
The CD will be pulled into the player automatically.
Do not attempt to assist or prevent this process.
➮Press the operating panel closed gently until you feel it click into place.
The audio system will switch on. CD playback will begin.
●If there already is a CD inserted into the player,
➮press CD•C ? repeatedly until “CD” appears in the display.
Playback will resume at the point where it was interrupted.
Selecting tracks
➮Press a key on the cursor block : to select the next or the previous track.
Press 
or 
: once to restart the same track.
Audible fast forward/reverse (CUE/REVIEW)
To start Cue or Review,
➮press and hold down either
or
:until the process begins.
Playing tracks in random order (MIX)
➮Press 5 MIX >.
“MIX CD” will appear briefly in the dis- play, the MIX symbol will light up in the display. The next track played will be selected at random.
Stopping the MIX function
➮Press 5 MIX >again.
“MIX OFF” will appear briefly in the dis- play and the MIX symbol will no longer light up.
Scanning tracks (SCAN)
You can scan all of the tracks on the CD.
➮Press OK ;for longer than two seconds. Scanning will begin with the next track.
Note:
It is possible to adjust the scan time. For more information, read the section on “Adjusting the scan time” in the chapter on “Radio Operation”.
42
