Appendices
Problem: Image is reversed.
Select “Image” from the OSD and adjust the projection direction.
See page 22, 23.
Problem: Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp”. See page 36.
Problem: LED lighting message
Message | Power LED | Temp LED Lamp LED |
| Amber |
|
Standby State | Slow Flashing |
|
(Input power cord) |
| |
|
| |
Lamp lighting |
|
|
Power on |
|
|
Power off (Cooling) | Quick Flashing |
|
Error (Lamp fail) |
|
|
Error (Thermal fail) | Flashing |
|
Error (Fan lock fail) | Flashing | Quick Flashing |
Error (Over Temp.) | Flashing |
|
Error (Lamp Breakdown) |
|
|
=>Light On | =>Light Off | |
