Acer SE manual System Sleep, Timer, Any keyboard or mouse, From the IRQ channels

V76MSE.book Page 59 Wednesday, May 19, 1999 1:25 PM

59

Parameter Description Options

System Sleep	Automatically puts the system
Timer	to power-saving mode after a
	specified period of inactivity.
	Any keyboard or mouse
	action, or any activity detected
	from the IRQ channels
	resumes system operation.

2, 5, 10, 15, 20, 30, 40, 50...120 minutes, or Off

Sleep Mode	Lets you specify the power-	Standby or
	saving mode that the system	Suspend
	will enter after a specified
	period of inactivity. This
	parameter is configurable only
	if the System Sleep Timer is
	enabled.
Power Switch < 4	Lets you specify whether to	Power Off or
sec.	automatically turn off the	Suspend
	machine or put the system to
	Suspend mode when the
	power switch is pressed for
	less than 4 seconds.
System Wake-up	Lets you specify the activity
Event	that will resume the system to
	normal operation.
Modem Ring	Wakes the system from Sleep	Enabled or
Indicator	mode once any fax/modem	Disabled
	activity is detected.