65
Installing an expansion card
To install an expansion card:
Caution: Your system accepts low profile PCI cards only.
1Remove the computer cover (see page 55).
2Locate an empty
3Remove the bracket lock that holds the bracket to the computer. Save the bracket lock.
4Pull out the bracket on the housing opposite the selected empty slot.
5Remove the expansion card from its protective packaging.
6Align the card with the empty bracket and then insert it into the slot. Make sure that the card is properly seated.
7Secure the card to your computer with the bracket lock you removed earlier.
8Replace the computer cover (see page 55).
When you turn on the computer, BIOS (Basic Input/Output System) automatically detects and assigns resources to the
Replacing the Veriton 5900Pro's hard disk
Follow these steps to replace your computer's hard disk:
1Remove the computer cover.
2Detach all cables connected to the hard disk and pull the hard disk out.
3Remove the drive rails that hold the hard disk to the disk frame and detach the hard disk. Set the drive rails aside.
4Insert the new hard disk into the frame and secure it with drive rails.
5Reattach all cables to the new hard disk.
Note: Make sure that the other ends of the disk cables are securely connected to their corresponding connectors on the mainboard.
6Reinstall the metal bracket frame to the housing.
7Replace the computer cover.
