Notes
*Any disc that is not listed above will cause the player to display “NO DISC” in the DISPLAY WINDOW. Future media and disc formats maybe supported with firmware upgrade, when available.
*Encoding methods of some media formats may affect the playback (e.g. Unable to fast forward or fast backward or load time). Be sure that the encoding process conforms to the standards for that particular format.
*Dirty, scratched, warped, and defective discs may cause a considerable time delay during the loading and reading of the disc. In extreme cases, this may render the disc
Handling and Cleaning of
Handling
*At anytime, when handling discs, always hold them from their edges and/or by the circle in the center. *NEVER write on the any surface of the disc for it may render the disc unreadable.
*Store discs in a clean and dry environment. Storing CD’s vertically will also help prevent warping.
*After use, insert CD into jacket or case to minimize wear and tear DO NOT stack CDs on top of one another. *Do not bend or press the disc. Do not expose the disc to direct sunlight or any heat source.
Video Signal Formats
This player also accommodates NTSC and PAL color systems, with automatic detection and override settings.
Digital Audio Formats
This player accommodates, Dolby Digital 5.1 Channels, DTS, and
NOTE
*Depending on the AUDIO SETUP> SPDIF settings digital audio signals may not be output as they are recorded on the disc.
Cleaning
*Wipe the discs from time to time using a soft cloth. Always wipe from the center towards the edges. NOT in circular motions.
*DO NOT clean with any other cleaning solution, unless it is specifically made for disc cleaning.
Notes Regarding Discs
*Some DVD's, the player starts playback automatically after inserting the disc, regardless whether or not PLAY BACK CONTROL is on or off.
*The image may be poor, noisy, or grainy due to actual defects on the disc itself.
*Some functions may not be possible on all discs as described in this manual.
CAUTION
Power-Cord
Handle the power cord only by its plug, do not unplug the power cord by tugging or yanking on the cord. Touching or unplugging the cord while your hands are wet may lead to an electric shock or a short circuit. If the cord becomes damaged or its wires become exposed, please replace the cord as soon as possible in order to prevent an electric fire or shock. Check the power cord every few months to ensure it is functioning properly.
NOTE
CDs revolve at very high speeds inside of players. Never attempt to play cracked or warped CDs; doing so may cause the disc to shatter inside or the player to malfunction.
6
