Acnodes APH 8104 user manual APH High brightness LCD Industrial panel mount monitor

APH 8104

10.4” high brightness LCD Industrial panel mount monitor

Pressing this button, a new window will be popped-up at the location when the touchscreen was mapped to area for this touch system to guide the user do 25 points calibration. User should follows the guide to touch and hold the blinking X symbol in the calibration window until it does not blink to make sure that the utility can gather enough data for computation. In addition, a time line bar is shown in the bottom of the window to indi- cate time elapsed. If the touchscreen was not touched before the time line bar going to right end, the calibra- tion task will be terminated automatically.

5. Draw Test

This function is used for accuracy and performance check. Press this button and a new pop up window will be popped up in the location where the touchscreen was mapped to the touch system as below,

User can press the Clear button to clear the window. Press Quit button to terminate this draw test.

661 Brea Canyon Rd., Suite 3 Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

© Copyright 2011 Acnodes, Inc.

All rights reserved. Product description and product specifications

are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.