Acnodes PC 8150

PC 8150 User

’

s Manua

er Installation 25

Identify

the

communication

port

and

number

1. For the first time installation, or changing PenMount Touch

Screen’s COM port, use PMDETECT (e.g.

C:\PENMOUNT\PMDETECT) to check the COM port and IRQ

number. PMDETECT will save the correct data to PMOUSE.CFG

file for further use.

The driver detects your communication COM port and IRQ number

from COM1 IRQ4, COM2 IRQ3, COM3…. to COM4 IRQ15.

PenMount driver can find the COM port and IRQ number

automatically. The screen will then show:

PenMount is initialized successfully!!!

Create file “pmouse.cfg”. Success.

PenMount internal settings:

Comm. Port: COM<n> IRQ<n>

..........

1. PMDETECT program is able to skip the IRQ number detecting if

you Touchscreen Driver Installation 13 do not need to detect the

specified IRQ number. For example, you do not need to detect

IRQ5, and the command is:

C:\PENMOUNT\PMDETECT -N5

If you do not need to detect IRQ5 and IRQ9, the command is:

C:\PENMOUNT\PMDETECT -N5 -N9

lib

ration

1. To adjust the touch screen mapping properly to display screen,

use PM.BAT (C:\PENMOUNT\PM) to do calibration. Choose “1”

DO CALIBRATION (adjust screen mapping).

2. The message on screen asks you to select video mode number.

Select

by keyboard to start the calibration, touch the upper-center point, then

right-center point, bottom-center point and left-center point in

sequence. After calibration, the data is shown in the screen, press any

key to continue the progress.

3. After the calibration, suggest you to test touch screen and display