32 A
pp
endix
PC 8150 User
’
s Manua
l
<hour> <minute> <second>. The time is calculated based on
the 24-hour military-time clock. For example, 1 p.m. is 13:00:00.
a
IDE Primary Master/Primary Slave
These items identify the types of each IDE channel installed in the
computer. There are 45 predefined types (Type 1 to Type 45) and
2 user’s definable types (Type User) for Enhanced IDE BIOS.
Press <PgUp>/<+> or <PgDn>/<−> to select a numbered hard
disk type, or directly type the number and press <Enter>. Please
be noted your drive’s specifications must match the drive table.
The hard disk will not work properly if you enter improper
information. If your hard disk drive type does not match or is not
listed, you can use Type User to manually define your own drive
type.
If selecting Type User, you will be asked to enter related
information in the following items. Directly key in the information
and press <Enter>. This information should be provided in the
documentation from your hard disk vendor or the system
manufacturer.
If the HDD interface controller supports ESDI, select “Type 1”.
If the HDD interface controller supports SCSI, select “None”.
If the HDD interface controller supports CD-ROM, select “None”.
CYLS. number of cylinders LANDZONE landing zone
HE
A
DS number of heads SECTORS number of sectors
PRECOMP write precom MODE HDD access mode
If there is no hard disk drive installed, select NONE and press
<Enter>.
a
Dive A type/Drive B type
The category identifies the types of floppy disk drive A or drive B installed
in the computer.
None No floppy drive installed
360K, 3.5 in 3.5 inch PC-type standard drive; 360Kb Mini ITXcity
1.2M, 3.5 in 3.5 inch AT-type high-density drive; 1.2MB Mini
ITXcity
3.5 inch double-sided drive; 720Kb Mini ITXcity
720K, 3.5 in 3.5 inch double-sided drive; 1.44MB Mini ITXcity
1.44M, 3.5 in 3.5 inch double-sided drive; 2.88MB Mini ITXcity
2.88M, 3.5 in
a
Halt On
This item determines whether the system will halt or not, if an
error is detected while powering up.