II.Connecting the Speaker System
I.Powering the Transmitter
Connect the small, round plug from the transmitter AC power adapter (L) to the transmitter power input jack (I) and plug the other end of the transmitter AC power adapter (L) into any standard 120V AC wall outlet.
Transmitter
120V AC wall outlet
I
AC Power
Adapter (L)
Note: Be sure to use the AC power adapter rated 12V DC 100 mA. Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you do not intend to use the AW871 for an extended period of time, you may wish to unplug the transmitter AC power adapter.
II. Connecting to an Audio Source:
i. Connecting to an A/V Receiver:
Transmitter |
A/V Receiver |
Audio Output |
“Y” adapter cable (N) |
Audio Input Cable (J) |
ii. Connecting to a TV:
1.Connect the included “Y” adapter cable (N) to the 3.5mm mini plug cable coming out of the transmitter.
2.Connect the
Transmitter
TV |
Audio Output |
1. | Connect the included “Y” adapter |
| cable (N) to the 3.5mm mini plug |
| cable coming out of the |
| transmitter. |
2. | Connect the |
| and right (red) audio plugs on the |
| “Y” adapter cable to the |
“Y” adapter cable (N)
Audio Input Cable (J)
corresponding left and right audio |
outputs on the TV. |
iii. Connecting to a Stereo or a Computer:
Transmitter |
|
| Stereo |
| 1/4” headphone |
Audio Input Cable (J) | adapter (O) |
|
Plug the cable coming out of the transmitter into the headphone output of your stereo or the audio output jack on your computer. Use the included 1/4” headphone adapter (P) to convert the 3.5mm plug to a 1/4” plug as needed.
3
