Runco CL-810 CINEWIDE manual Use the HDMI input whenever possible. This ensures the highest

Installation

If your installation does not include an SDC-1: Connect your video sources to the CL-810 as shown and described in the sections that follow.

HDMI/DVI Connections: See Figure 3-10.With an HDMI source, use the included HDMI-to-HDMI cable; with a DVI source, use the included DVI-to-HDMI cable.

Use the HDMI input whenever possible. This ensures the highest

Tip video quality because the signal is carried in the digital domain throughout the entire signal path, from source component output into the projector.

Connecting Source Components to the CL-810

S-VID /

VID-S

HDMI or DVI Source

(DVD Player or HD Set Top Box)

Figure 3-10. HDMI/DVI Source Connections

RGB Connections: Connect your personal computer or other RGB source (DVD player or HD set top box) to the COMP 2/RGB input; see Figure 3-11.You can use the included DB15HD-to-5 x BNC cable if your RGB source has a 15-pin, VGA-type connector.

S-VID / VID-S

Green Blue Red Horiz Vert

DVD Player or

HD Set Top Box

S-VID / VID-S

Green Blue Red Horiz Vert

Personal Computer

Figure 3-11. RGB Connections

Runco CL-810 Series Owner’s Operating Manual 27