Runco CL-810 ULTRA, CL-810 CINEWIDE manual Using Picture-In-Picture/ Picture-By-Picture PIP/PBP

Operation

4.5 Using

Picture-In-Picture/ Picture-By-Picture (PIP/PBP)

Note	PIP and PBP are not available when the CL-810 is used with the
	SDC-1 System Expansion Device.

For PIP and PBP purposes, there are two groups of inputs separated by their display modes:

•Video (SD) group: Video, S-Video and Component 1 inputs.

•Graphic (HD) group: HDMI and Component 2/RGB inputs.

PBP ACT PIP PIP+

FOCUS ZOOM LENS PIP-

4.6

Using the On-Screen Menus

PIP / PBP shows one input from the Graphic group within or beside one input from the Video group.

•Press PBP to enable the PBP function. Press PBP again to switch the screens left to right. Press PBP again to turn PBP off.

•Press ACT (Active) to switch to the active window. (You can only switch inputs in the active window.)

•Press PIP to enable the PIP function. Press PIP again to switch the main window. Press PIP again to turn PIP off.

•To adjust the size of the PIP window, press PIP+ or PIP-.

•Adjust the position of the PIP window with the arrow buttons ( , , , ).

•Press the MENU button on the remote control to display the Main Menu. To select a menu item, use the UP and DOWN buttons on the remote control to highlight it. Press ENTER or to confirm your selection.

•Use the arrow buttons to select menu items or change settings.

•Press EXIT to return to the previous menu.

•Press MENU to turn off the OSD menu. (When the Main Menu is displayed, pressing EXIT also turns off the menu.)

The CL-810 OSD menus are arranged hierarchically, as shown in Figure 4-1.Depending on the selected input source and signal characteristics, some menu options may not be available.

46 Runco CL-810 Series Owner’s Operating Manual