Runco CL-810 ULTRA manual Mounting the CL-810, Floor Mounting Upright, Ceiling Mounting, Inverted

Installation

There are several methods for mounting the projector. Depending on your chosen installation, one method may be more suitable than another.

In typical front and rear screen installations, the projector can be mounted to a secure and level surface such as a table or cart. Carts are useful when moving a projector during a presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it from being moved during a presentation.

3.5

Mounting the CL-810

Floor Mounting (Upright)

For fixed installations, and for those that want the projector out of sight or have a limited		Ceiling Mounting
space for projector and audience, you can invert the CL-810 and suspend it from the		(Inverted)
ceiling using a specially-designed ceiling mount fixture.
Note	Use only the Runco-approved ceiling mount kit designed for your
	projector. Install the mount kit according to the instructions
	provided with it.
The projector can also be inverted and placed in an enclosure above and behind the
viewing area. Install four feet on the inside bottom surface of the enclosure on which the
projector can rest. A variety of materials can be used for this purpose (for example, rubber
crutch tips or turntable feet).
If the screen is significantly higher or lower than the projector, you can also tilt the		Adjusting the Projector
projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling		Height or Projection Angle
mount.

For a floor installation, turn the four adjustable feet on the bottom of the projector to adjust the projector height and/or projection angle.

If you do this, you may need to make keystone adjustments or vertically shift the image using the on-screen display (OSD) controls, to compensate. For detailed instructions, refer to Using the On-Screen Menus on page 46.

Runco CL-810 Series Owner’s Operating Manual 25