Runco CL-810 CINEWIDE, CL-810 ULTRA Operation, Selecting Video Memory, Selecting An Input Source

Operation

• Press the MEM1 button on the remote control

to recall settings for the current input from the	MEM1	ISF	ISF	FACT
		NIGHT	DAY
“Memory 1” memory preset.

•Press ISF NIGHT to recall settings for the current input from the “ISF Night” memory preset.

•Press ISF DAY to recall settings for the current input from the “ISF Day” memory preset.

•Press FACT to recall the factory-default settings for the current input.

4.1

Selecting Video Memory

Use these buttons to select the appropriate aspect ratio for the type of program material being viewed. For more information on aspect ratios, refer to Table 4-1.

•Press the BRT button on the remote control to adjust the image brightness.

•Press CONT to adjust the image contrast.

•Press COL to adjust the image color level.

•Press TNT to adjust the hue of the image.

For more information about these controls, refer to

ANA	4X3	LBOX	VWIDE
16X9
CINEMA	1	2	VCINE

BRT CONT COL TNT

Picture Adjustment on page 48.

4.2

Selecting an Aspect Ratio

4.3

Adjusting the Picture

When you turn on the CL-810, it switches to the	LIGHT	ON	OFF
last selected input and looks for a valid signal.
Use these buttons on the remote control to select	VID	S-VID	COMP1 COMP2
an input source directly.
		RGBHD	HDMI

4.4

Selecting An Input Source

Runco CL-810 Series Owner’s Operating Manual 45