Runco CL-810 CINEWIDE, CL-810 ULTRA, CL-810 / SDC-1 manual Anamorphic Lens

Installation

Focus: Finally, rotate the Focus Ring on the anamorphic
lens to fine-tune the optical focus.	S

U

C

O

F

Standard CL-810/CineWide (Prismatic Lens): The standard CL-810 Anamorphic lens mount kit consists of everything shown in Figure 3-19.Some components shipped with your projector may differ slightly from what is shown in these instructions.

1 Anamorphic Lens

2 Mounting Bracket (2x)

3 Pitch Adjustment Screw,

4-40 x 5/16" (4x)

4 Washer (4x)

5 Y-Adjustment Screw, Phillips Pan-Head, 6-32 x 3/8" (4x)

6 Fender Washer (4x)

Figure 3-19. Standard CL-810 Anamorphic Lens Mounting Assembly - Exploded View

1.Use the Pitch Adjustment Screws (item #3) and Washers (item #6) to

attach the Mounting Brackets (item #2) to the Anamorphic Lens (item #1).

2. Use the four Y-Adjustment Screws (item #5) and Washers (item #4) to attach the Anamorphic Lens assembly to the front of the projector. (Do not fully tighten the screws yet.)

Anamorphic Lens

Installation and Adjustment - Standard CL-810/CineWide or CL-810 Ultra/CineWide

Runco CL-810 Series Owner’s Operating Manual 39