Connecting the Speaker System
Powering the Transmitter
Connect the small, round plug from the transmitter AC power adapter to the transmitter’s power input jack. Plug the other end of the transmitter AC power adapter into any standard 120V AC wall outlet.
Transmitter |
120V AC |
wall outlet |
AC Power |
Adapter |
Note: Be sure to use the AC power adapter rated 12V DC 100 mA.
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you will not be using the AW822 for an extended period of time, unplug the transmitter AC power adapter.
Connecting to an Audio Source
Connecting to an A/V Receiver
Transmitter |
A/V Receiver |
Audio Output |
“Y” adapter cable |
Audio Input Cable |
1.Connect the included “Y” adapter cable to the 3.5mm
2.Connect the left (white) and right (red) audio plugs on the ”Y” adapter cable to the corresponding left and right audio outputs of your A/V receiver, amp or other audio source.
Connecting to a TV
TV |
Transmitter |
Audio Output |
“Y” adapter cable |
Audio Input Cable |
1.Connect the included “Y” adapter cable to the 3.5mm
2.Connect the left (white) and right (red) audio plugs on the “Y” adapter cable to the corresponding left and right audio outputs on the TV.
Connecting to a Stereo or Computer
Transmitter |
|
| Stereo |
| 1/4” headphone |
Audio Input Cable | adapter |
| |
|
Plug the cable coming out of the transmitter into the headphone output of your stereo or the
audio output jack on your computer. Use the included 1/4” headphone adapter to convert the 3.5mm plug to a 1/4” plug as needed.
