APPENDIX C - TECHNICAL SPECIFICATIONS
406 MHz Transmitter
Frequency | 406 MHz |
Output Power | greater than 5 watts (typical: 6.3 watts) |
Frequency Stability | ±2 parts per billion/100ms |
Digital Message: |
|
Format |
|
Long message | Serialized1* |
Message protocol | Standard Location |
Duration | 520 ms |
Rate | 400 bps |
Encoding | Biphase L |
Modulation | ±1.1 radians peak |
1* Beacons are shipped from ACR with a Serialized code but can be reprogrammed at a service center to other coded formats including nationality of registration.
121.5 MHz Transmitter
| Frequency: | 121.5 MHz |
| Frequency Tolerance | ±50 ppm |
| Output Power | >25 mW PEP |
| Morse Code “P” ID | Every 50 seconds (approximately) (U.S. Protocol) |
| Modulation |
|
| Type | AM (3K20A3N) |
| Sweep Range | 400 to 1200 hZ |
| Sweep Rate | 3 Hz |
| Duty Cycle | 37.5% |
| Morse P | AM (2K00A2A) |
| Antenna |
|
| Frequency | 406.037 & 121.5 MHz |
| Polarization | Vertical |
| VSWR | Less than 1.5:1 |
| General/Environmental |
|
| Minimum Battery | +24 hours minimum @ |
| Operating Life | |
|
| |
| Battery Replacement | Battery replacement due no later than 6 years from date of |
| Interval | manufacture, 5 years from date of install, or after emergency use |
| *Batteries meet the UN Classification for | |
|
|
|
| Size of beacon less | 2.31 x 5.81 x 1.25 in (5.87 x 14.76 x 3.17 cm) (SARLink™) |
| Antenna | 2.31 x 5.81 x 1.45 in (5.87 x 14.76 x 3.68 cm) (AquaLink™) |
| Material | |
| Color | |
| Weight | 8.9 oz (252 g) without belt clip (SARLink™) |
| 9.2 oz (260 g) without attachment clip (AquaLink™) | |
|
| |
| Waterproof | Factory tested to 16.4 ft (5 m) for 1 hour and to 32.8 ft (10 m) for 10 |
| minutes, both at room temperature | |
|
| |
| Buoyancy | See section 4 “Distinguishing PLB Features”, page 8 |
| Temperature Range |
|
| Operating | |
| Storage: |
PLB350B meets the requirements of Federal Communications Commission (FCC) Part 95 Subpart K. For all other type approval information, please visit our website at www.acrelectronics.com.
19 |