8
Setting Daylight Saving Time · Press button one once. If you are entering the programming mode for the first
time, you will need to press button one three times to set Daylight Saving Time.
The display reads S1 0-0 with S1 indicating the start of Daylight Savi ng Time.
· Press button four to set the month (1-12, with 1= January, 2 = February, etc.)
The display reads S1 0-0 with OUT3 flashing in the lower-right hand corner of
the display. Press button four until the month Da ylight Saving Time should start
is set.
· Press button five to set the day of the month. OUT3 flashes in the lower-right
hand corner of the display. Press button five unt il the day Daylight Saving Time
should start is set.
· Press button six to save the mont h and day Daylight Saving Time should start.
OUT3 will no longer be displayed indicating this setting has been saved. The
program will automatically switch to setting the ending date for Daylight
Saving Time. The display should now read S2 0-0.
The ending date for Daylight Saving Time is set exactly the same as the beginning
date.
· Press button four to set the month (1-12, with 1= January, 2 = February, etc.)
The display reads S2 0-0 with OUT3 flashing in the lo wer-right hand corner of
the display. Press button four until the month Da ylight Saving Time should end
is set.
· Press button five to set the day of the month. OUT3 flashes in the lower-right
hand corner of the display. Press button five unt il the day Daylight Saving Time
should end is set.
· Press button six to save the mont h and day Daylight Saving Time should end.
OUT3 will no longer be displayed indicating this setting has been saved. The
display will return to the starting date.
Note: The starting and ending dates for Daylight Saving Time must be set each
year. Both the starting and ending dates must be set for Daylight Saving Time to be
operational. At midnight on the starting date, the clock will automatically advance
one hour. At midnight on the ending date, the clock will go back one hour. For