Acroprint ATR120 VIII. Maintenance

To print, insert a time card into the receiver with the pay

period selected, facing you. Note: The clock cannot

differentiate the pay period and will print on either side

of the time card. The card is automatically pulled in and

printed. Do not attempt to pull the card out during the

printing operation or to insert any objects other than time

cards. Doing so can result in damage to printer.

VIII. Maintenance

Several simple suggestions may extend the life of your ATR120.

· Close the anti-dust cover after operation.

· When the case is dirty, wipe it with a damp soft cloth. If necessary, a mild

detergent may be used. Do not use any t ype of thinner or other chemical for

cleaning because the chemical could damage or discolor the case.

When the printing on the time card becomes light or hard to read it will be necessary

to replace the ribbon. Use the ATR122 replacement ribbon cassette (part number 39

0127 000). Attempting to “re-ink” the cassette will cause permanent damage to the

printer.

To open the front cover, turn the clock on its back and remove the two outer screws.

Stand the clock upright with the back facing you. With both thumbs press down on

IN1 and OUT3 buttons while using your fingers to push cover away.