1Connect the Modem to a Computer
Step1 Get the DSL Modem from your DSL Quick Start Kit and take it out of the bag.
Step4 Plug the larger end of the Power Cord into a Power Outlet.
Power
Outlet
Power
Cord
Step8 Make sure that your computer is turned on. Then, plug the other end of the YellowCable into the Ethernet Port on the back of the computer.
Step12 Plug the other end of the DSL Cable into the Phone Jack closest to your computer.
Phone
Port
Black
Cable
Step2 Get the Power Cord from your DSL Quick Start Kit.
Step5 Make sure the Power Light on the Modem is SOLID Green.
An Ethernet Port looks similar to a regular Phone Jack, but is slightly larger.
Step9 Make sure that the Ethernet
Step13 Make sure All Devices with the same phone number as your DSL Line have Phone Filters.This includes telephones, fax machines, caller ID boxes,satellite TV receivers,TiVo devices, and answering machines.
example of a typical inline
phone filter
Note: Your Power Cord may look different.
Note: The DSL light may blink.
Step6 Get the Yellow Cable. |
Yellow Port |
light on the Modem is Green. This may take a few moments.
Note: If the Ethernet Light does NOT turn green, make sure the Yellow Cable is properly connected on both ends.
Step14 Make sure that the Power and DSL Lights are solid Green. This may take up to 30 seconds.
Step3 Plug the smaller end of the Power Cord into the Black Port on the back of the Modem.
Power
Cord
Black
Port
Step7 Plug one end of the Yellow | Yellow |
Cable | |
Cable into the Yellow Port on the |
|
back of the DSL Modem. |
|
Step10 Get the Black or Gray DSL Cable from your DSL Quick Start Kit.
Step11 Plug one end of the DSL Cable into the Gray Port located on the back of the Modem.
Gray Port
Black Cable
Note: If the DSL Light continues to blink, make sure you received notification from your DSL Internet Service Provider that your DSL service has been activated.
Flip this Quick Start Guide over to continue | NEXT |
|
|
|
|