1Connect the Modem to a Computer

Step1 Get the DSL Modem from your DSL Quick Start Kit and take it out of the bag.

Step4 Plug the larger end of the Power Cord into a Power Outlet.

Power

Cord

Power

Outlet

Step9 Make sure that your computer is turned on. Then, plug the other end of the YellowCable into the Ethernet Port on the back of the computer.

Step13 Plug the other end of the DSL Cable into the Phone Jack closest to your computer.

Phone

Port

Black

Cable

Step5 Make sure the Power Switch is ON.

An Ethernet Port looks similar to a regular Phone Jack, but is slightly larger.

Step14 Make sure All Devices with the same phone number as your DSL Line have Phone Filters.This includes telephones, fax machines, caller ID

example of a typical inline

phone filter

Step2 Get the Power Cord from your DSL Quick Start Kit.

Step6 Make sure the Power Light on the Modem is SOLID Green.

Note: The DSL light may blink.

Step10 Make sure that 1 of the 4

Ethernet lights on the Modem is

Green. This may take a few moments.

Note: If the Ethernet Light does NOT turn green, make sure the Yellow Cable is properly connected on both ends.

boxes,satellite TV receivers,TiVo devices, and answering machines.

Step15 Make sure that the Power and DSL Lights are solid Green. This may take up to 30 seconds.

Note: Your Power Cord may look different.

Step

Black

 

3 Plug the smaller end of

Port

 

the Power Cord into the Black

 

Port on the back of the Modem.

 

 

Power

 

Cord

 

 

Step7 Get the Yellow Cable.

Yellow Port

 

Yellow

Step8 Plug one end of the Yellow

Cable

 

Cable into any of the YellowPorts on

 

the back of the Wireless DSL Modem.

 

 

 

Step11 Get the Black or Gray DSL Cable from your DSL Quick Start Kit.

Step12 Plug one end of the DSL Cable into the Gray Port located on the back of the Modem.

Gray Port

Black Cable

Note: If the DSL Light continues to blink, make sure you received notification from your DSL Internet Service Provider that your DSL service has been activated.

Flip this Quick Start Guide over to continue

NEXT

 

 

 

 

Page 1
Image 1
Actiontec electronic GT724R quick start Connect the Modem to a Computer, Step