26
Actiontec MegaPlug AV 200 Mbps Ethernet Adapter User Manual
9. The “Internet Protocol (TCP/IP) Properties” window appears.
10. In the General tab, make sure the circle next to “Obtain an IP Address auto-
matically” is selected. When active, a black dot appears in the circle. If the
circle already contains a black dot, leave it alone.
11. Enter the following numbers in the “IP Address” text box:
192.168.1.2
Press the space bar on the keyboard to add the periods between the numbers.
12. Enter the following numbers in the “Subnet mask” text box:
255.255.255.0
Press the space bar on the keyboard to add the periods between the numbers.
13. Click OK. The “Internet Protocol (TCP/IP) Properties” window disappears.
14 In the “Local Area Connection Properties” window, click OK. The Local Area
Connection Properties window disappears.
15. Click Close in the Local Area Connection Status window. The window disap-
pears.
16. Close the Network and Dial-up Connections window by clicking on the “x”
button at the upper right corner of the window.
The computer is now set up with a static IP address.