MyWirelessTV User Manual
Reset to Factory
Selecting Reset to Factory in the Advanced Settings screen generates a window on the screen, asking the following: Are you sure you want to reset to factory defaults? If you reset MyWirelessTV to factory default settings, all saved pairing information will be lost (except the original pairing information). Select Reset to have MyWirelessTV go through the reset procedure, which will take about 1 minute. A er reboot, MyWirelessTV devices will have been reset to factory default settings. Select Cancel to exit this window without resetting MyWirelessTV.
Updating MyWirelessTV Firmware
Actiontec recommends that all MyWirelessTV users update their device with the latest rmware update to take advantage of recently developed performance enhancements, new features, and bug xes. To view the current rmware version number, press the Menu button on the MyWirelessTV remote control, then select Advanced Settings (or press the (i) button on the remote control. Compare this version number with the latest version available at http://www.actiontec.com/mwtv. If the version on your MyWirelessTV device is older, perform the following procedure.
To update the rmware on your MyWirelessTV devices:
1.Using a web browser, go to http://www.actiontec.com/mwtv.
2.Follow the online instructions to download the latest MyWirelessTV rmware to the USB thumb drive included in the MyWirelessTV kit.
3. Once the rmware is downloaded to the thumb drive:
a. On a Receiver, plug the USB thumb drive into the USB port on the front of the Receiver;
b. On a Transmitter, plug the USB thumb drive into the larger end of the mini USB adapter, then plug the smaller end of the mini USB adapter into the mini USB port on the front of the Transmitter.
27
