32
Actiontec Network Attached Storage Device User Manual
33
Chapter 3 Using the Administrative Utility
Location
The Location associated with the Share. Note that once a Share is created, its
location can not be changed. There are two options:
• Default folder- if selected, creates the Share in the default folder.
• Specify - if selected, enter the folder (directory) to be converted to a Share.
If the folder does not exist, it will be created.
Save as New Share
After entering the required data in the “Share Properties” area, use this button to
create a new Share on the selected disk.
Clear Form
Clear the form, preparing it for the creation of a new Share.
Save
Use this button to change the properties of a Share, as follows:
• Select the desired Share from the Shared folders. Its details are displayed in
the “Share Properties” area.
• Change the Share properties as required. Note the location cannot be
changed.
• Click Save to save the changes.
Help
Click this button for more information about this screen.