Acu-Rite 13002, 13001 instruction manual Clock Setup, Intelli-TimeClock, Set the Time & Date

SETUP

Clock Setup

Plug the power cord into power outlet.

Intelli-Time®Clock

Intelli-Time clock and calendar are pre-programmed to the correct time and date, and update automatically for Daylight Saving Time. All you need to do is select your time zone using the “TIME ZONE” switch.

Set the Time & Date

Choose the correct time zone (HAST AKST PST MST CST EST AST) using the “TIME ZONE” switch on the top of the clock.

Set Daylight Saving Time ON or OFF using the “DST ON/OFF” switch on the bottom of the clock.*

Press and hold the “TIME SET” button for 3 seconds to enter the SET MODE. Once in the SET MODE the preference you are currently in will blink on the clock.

To adjust the currently selected (flashing) item, press and release the

“+ FORWARD” or “- BACKWARD” buttons (press and HOLD to fast adjust). To save your adjustments, press and release the “TIME SET” button to adjust the next preference. The preference order is as follows:

CLOCK HOUR (Please note PM Indicator light)

CLOCK MINUTE

CLOCK MONTH

CALENDAR DATE

CALENDAR YEAR

You will automatically exit SET MODE if no buttons are pressed for 5 seconds. Enter SET MODE any time by pressing and holding “TIME SET” button for 3 seconds.

*If you live in an area that observes daylight saving time, DST should be set to ON.

4