Acu-Rite 13002, 13001 Troubleshooting, Care & Maintenance, Replace Intelli-Time Clock Battery

Troubleshooting

Clock won’t turn on	• Reset the unit by pressing the reset button located on
	the bottom of the clock. This will reset the alarm to the
or displays partial
	original factory settings. Time and date will need to be
numbers
	entered after a reset.
Blinking Colon (dots)	• Blinking of the dots is a way that the seconds are
	counted. There is no way to stop the dots from blinking.

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.

Care & Maintenance

Clock Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.

Replace Intelli-Time Clock Battery

Intelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. To replace the Intelli-Time battery:

1.Locate the coin cell battery compartment door on the bottom of the clock. Unscrew and remove the compartment cover.

2.Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.

3.Screw in the battery cover.

CR2032

3V

+

6