temperature is trending.
10.When the Current Temperature of the food reaches the Desired Temperature the thermometer/pager (if in use) will beep and temperatures on the display will flash.
11.Press “
” button to silence the thermometer alert, or press “ 
” button to power OFF the thermometer/pager.
Be careful when touching the temperature probe and probe wire if it has been in or near hot food or surfaces.
Remote Pager Setup
The Remote Pager can receive alerts from the thermometer when the Desired Temperature is reached.
1.Press “
” button on the Remote Pager to power ON.
2.Pager emits an audible chirp and the Power indicator (red) flashes until a signal is established.
3.Power indicator (red) remains lit when a good connection is established and maintained, indicating that the pager is ready for use.
4.When the desired temperature is reached, the Power indicator (red) and
Status indicator (green) will flash and audible alerts will sound on the
Remote Pager unit until the “
” button is pressed.
Timer
The thermometer features a countdown/countup timer.
To count down:
1.To adjust the countdown time, press the “MIN” and “SEC” buttons, located on the thermometer display. To clear an entry press the “MIN” and “SEC” buttons simultaneously.
2.Press “START STOP” button when desired time is set, and the timer will begin the countdown.
3.When 00:00 is reached, thermometer/pager (if in use) beeps until “ 
” is pressed or “MIN” and “SEC” buttons are pressed simultaneously.
To count up:
Press “START STOP” button, and the timer will begin counting up.
Power the Unit ON/OFF
Press the “ 
” button to turn the thermometer display ON. To power off manually, press the “
” button.
The thermometer will automatically power off after 4 hours of temperature readings below 100ºF. The pager will automatically power off after 1 hour without a wireless connection to the thermometer.
6
