Acu-Rite 615 3-IN-1Sensor Setup, 1Set the A-B-CSwitch, 2Install or Replace Batteries, A B C

SETUP

3-IN-1 Sensor Setup

1Set the A-B-C Switch

The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize.

2Install or Replace Batteries

AcuRite recommends high quality alkaline or lithium batteries for the best product performance.

Heavy duty or rechargeable batteries are not recommended.

The 3-in-1 sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to

A B C

1 A-B-C Switch set to match display unit

function improperly. Use lithium batteries in the 3-in-1 sensor for temperatures below -4ºF / -20ºC.

1.Press the release lever and pull off the lower housing of the sensor.

2.Remove the battery compartment cover.

3.Insert 4 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.

4.Replace the battery cover and lower housing of the sensor.

2 Install Batteries

4 AA batteries

6