00683A3
6 MULTIPLE WIRELESS SENSORS
The main unit supports up to three wireless sensors. Each additional wireless sensor must be designated a different channel number. Assigning different channel numbers differentiate each sensors temperature and hygrometer readings for the main units’ display. The included wireless sensor is automatically channel # 1.
Instruction Manual
Wireless Thermometer
Additional wireless sensors are sold seperately. Call
1)Open each sensor by separating the front and back pieces
3)Use the interior slide switch to select a channel
NOTE: use channel #2 and/or #3. Channel #1 is already taken by the included wireless sensor.
6)Press the TX button to send a signal to the main unit.
7)Snap the front and back pieces together.
8)Mount the sensor. See section 3 for placement of the remote sensor unit.
7 TROUBLESHOOTING
Problem:
Possible solutions:
•Move sensor away from interference (electrical devices, metal surfaces, etc.).s •Batteries may need replacing.
•Sensor could be out of range (more than 100 feet from the main unit). Place the sensor closer to the main unit.
Problem: The temperature shown for “OUT” (wireless sensor) seems to be inaccurate
Possible solutions:
CH
MIN/MAX
CLEAR
WIRELESS
MODEL # 00683A3
WIRELESS
•The wireless sensor will not send an outdoor temperature reading if it is not placed outdoors. Be sure that the wireless sensor is placed outdoors.
•Make sure that the wireless sensor is out of direct sunlight or direct weather elements, these locations may cause inaccurate readings
•Reset both units by removing all batteries and
Do not return product to retail store. For Technical Assistance and product return information, please call Customer Care:
HOURS: Monday through Friday from 8:00 a.m. to 4:45 pm CST.
PLEASE DISPOSE OF OLD
OR DEFECTIVE BATTERIES
IN AN ENVIRONMENTALLY
SAFE WAY IN ACCORDANCE
WITH LOCAL REGULATIONS
Main Unit | Wireless Sensor |
Thank You! We appreciate you for purchasing this wireless thermometer. We hope you enjoy using this versatile wireless thermometer!
Features:
•Main unit with indoor and outdoor LCD temperature display.
•Wireless Sensor – range is 100’ (33m).
•Temperature measurement ranges:
Indoor main unit: +32º F to +122º F
Outdoor wireless sensor:
• Battery operated. (batteries not included)
1 CHECK PACKAGE CONTENTS
(1) Main unit - dimensions: 2.75" x 3.5" x 1" (7 cm x 9 cm x 2.5 cm)*
(1)Wireless Sensor – dimensions: 2.5" x 3.5" x 1" (6.4 cm x 9 cm x 2.5 cm)*
(3)1" (2.5cm) screws with plastic anchor
(1)Instructions *Dimensions are approximate.
NOTE: Carefully remove the units from their packaging. Discard the packaging and save the instructions.
2 READ
Please read these instructions carefully before you set up the thermometer. In this way you can become familiar with all of the thermometer’s features and get the most benefit from them.