Acumen Pedometer manual Distance settings, Goal Beeper

•A low tone indicates a full Hour/Mile (KM).

•A high tone indicates a half Hour/Mile (KM).

For instance, 3 low tones and a high tone indicate the user has completed 3.5 hours or miles.

D.2. Goal Beeper

User can program a goal (either in terms of time or distance). When this goal is accomplished, the unit will sound a continuous beep for 2 seconds.

D.2.1. Time Goal Setting

Make sure the 3-positions switch is at the Radio position. Then slide it to the Time position. The time goal setting will be displayed for 3 seconds. To change the setting, hold down the Adjust button during the 3 seconds. The goal time will start to blink and can be changed by using the "+" and "-" buttons.

D.2.2. Distance Goal Setting

Make sure the 3-positions switch is at the Radio position. Then slide it to the Distance position. The distance goal setting will be displayed for 3 seconds. To change the setting, hold down the Adjust button during the 3 seconds. The goal distance will start to blink and can be changed by using the "+" and "-" buttons.

E. Distance settings :

Turn to the back of the Jogman, open the battery door. Remove the battery, you will see a slide switch, the indication is for distance setting in Km or Miles. Select the unit to your own choice as shown below.

DIST RADIO TIME

Mi

Km

3