ADC ADG-758 manual Table of Contents

Table of Contents
Control Door Assembly Without Trim	2
Control Door Assembly With Trim	3
Phase 5 OPL Microprocessor Control Panel Assembly	4
Phase 5 Coin Microprocessor Control Panel Assembly	5
Phase 5 Coin and OPL Microprocessor Control Box Assembly	6
Coin Vault Assembly	7
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 3, 2000	8
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 3, 2000	9
Dual Timer Control Box Assembly	10
Front Panel Assembly for Plastic Door	11
“Plastic” Main Door Assembly	12
Main Door Switch Housing for Plastic Door	13
Main Door “Cold Rolled Steel (CRS)” Assembly	14
Main Door Switch Assembly Cold Rolled Steel (CRS) Door	15
Cold Rolled Steel (CRS) Door Front Panel	16
Basket (Tumbler)/Support Assemblies	17
Drop Lint Door Assembly Without Trim	18
Drop Lint Door Assembly With Trim
For All Coin Models	19
Lint Trap Assembly	20
Idler Bearing Assembly	21
Basket (Tumbler) Bearing Assembly	22, 23
Non-Reversing T.E.F.C. Motor Mount Assembly	24, 25
Reversing T.E.F.C. Motor Mount Assembly	26, 27
Sensor Bracket Assemblies	28, 29
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of April 15, 2000	30, 31
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to April 15, 2000	32, 33
Single-Phase (1Ø) Motor, Electric Relay Panel Assembly	34
3-Phase (3Ø) Motor, Electric Relay Panel Assembly	35
Microprocessor Reversing Rear Control Box Assembly	36
Dual Timer Reversing Rear Control Box Assembly	37
Outer Top/Back Guard Assemblies	38
Microprocessor Coin Acceptors Listing	39
Step Down Transformer Usage Listing	40
Additional Parts Available	41