ADC manual ADX200 and ADX201, Spec Sheet, ADX Active Digital Cross-Connect, Features

ADX Active Digital Cross-Connect

ADX200 and ADX201

Spec Sheet

The ADX Active Digital Cross-Connect provides an innovative solution for interconnecting systems in telecommunications and exchange buildings, reducing space by 50 to 80 percent, increasing flexibility and bringing down overall capital (CAPEX) and operational expenditure (OPEX).

The ADX combines in one package a very compact SDH add/drop multiplexer (ADM), up to 64 accessible E1 ports, optional STM-1 aggregation ports, E1 cross-connect and a DDF. It complies with SDH standards and supports operations and administration features required for successful integration into an existing transport network.

Features

•Non-intrusive automated test access on DDF

•DDF traffic restoration in case of network failures

•E1 traffic concentration over STM-1. 63 E1 ports can be aggregated on a single fibre optic or single electrical link.

•Two STM-1 hot pluggable optical or electronic SFP (small-form-factor pluggable) interfaces.

Application and Benefits:

•Ideal for limited space applications in remote sites

-Wireless base station or wireless concentrator sites

-E1 to the curb or E1 to the building

•Saves installation cost

-Eliminaties extensive E1 copper cabling between DDF and ADM/DCS, saves installation time and reduces cabling errors

-Pre-configured system

-Easy service turn-up

-No need for additional, highly trained staff

•Increases quality of service (QoS)

-Possibility of monitoring access for all relevant test parameters

•Offers space and cost saving expansion of installed SDH systems

-Conventional ADM/DCS over a limited number of E1/DS1 ports

-The ADX provides additional E1/DS ports to an ADM/DCS via the STM-1 interface

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1