ADC Broadband System manual 120

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

DLP-530

Page 2 of 3

	ODS2 CONFIGURATION
	Group: 3
Unit Equip State : EQUIPPED		T2 Service State : IS
Unit	Service State: IS	BER Alarm Thresh: 1E-8
Unit	Protect State: UNPROTECTED	BER Switch Thresh: 1E-6

T1			Service	Line
PARAMETERS		Provision State		Code Circuit ID
		========= =======		==== ====================
T1	#1:	YES	OOS	AMI
T1	#2:	YES	OOS	AMI
T1	#3:	YES	OOS	AMI
T1	#4:	YES	OOS	AMI

T1		Remote Pulse	Remote	Remote PPS
PARAMETERS		Equalization	Frame Format	Threshold
		===========	============	=============
T1	#1:	N/A	N/A	N/A
T1	#2:	N/A	N/A	N/A
T1	#3:	N/A	N/A	N/A
T1	#4:	N/A	N/A	N/A
Remote Housekeeping Labels:
Working Card		HSKP1: RMT-HSKP1		HSKP2: RMT-HSKP2
Protect Card		HSKP1: N/A		HSKP2: N/A
		Press CONTROL-A For Assistance

8110-C

Figure 530-1. ODS2 Configuration Screen

Table 530-1. ODS2 Configuration Fields

FIELD	TYPE	OPTIONS	DESCRIPTION	DEFAULT
Group	Toggle	1, 2, 3, 4, 5, 6, or 7	Specifies the module’s group number	1
			designated on the chassis.
Unit Equipment	Toggle	Equipped	Establishes communication with MPU. Module	UNEQUIPPED
State			must be set to EQUIPPED before remaining
			selections are allowed. Sets all other fields to
			default values and allows MPU to process
			equipment alarms.
		UNEQUIPPED	No communication with MPU.
Unit Service State	Toggle	IS (In-Service)	Places the unit in service and allows equipment	OOS
			alarm reporting by the MPU. Must be set to IS
			for reporting of equipment alarms.
		OOS (Out-Of-Service)	Removes unit from service and stops equipment
			alarm reporting by the MPU.
Unit Protect State	Toggle	PROTECTED	Designates that equipment APS is available.	UNPROTECTED
		UNPROTECTED	Designates that equipment APS is not available.
				(continued)

2-97

© 2000, ADC Telecommunications, Inc.