ADC Broadband System manual 276

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

TAD-101

Page 5 of 9

Table 101-1. Soneplex Broadband System (V5) Specifications, continued

PARAMETER	SPECIFICATION	REMARKS
A2 RLX Module
Frame Format	SF, ESF, SLC96, and unframed
Frequency	1.544 Mbps ± 200 bps (130 ppm)
Input Signal Level	0 dB to –33 dB	Clock recovery range for loop
		timing.
Line Code	AMI or B8ZS
Output Line Buildout Settings	0.0, 7.5, 15.0, and 22.5 dB
Output Signal Range	Up to 3,000 feet (914.4 meters)	Up to 6,000 feet (1,828.8 meters)
		with ideal cable conditions.
Span Power	60 mA, –140 VDC max.	Up to 7 or 14 watts
Version B RLX / RLXIOR Modules
Frame Format	SF, ESF, SLC96 and unframed
Frequency	1.544 Mbps ± 130 ppm
Input Signal Level	0 dB to –33 dB	Clock recovery range for loop
		timing
Line Code	AMI or B8ZS
Output Signal LBO Settings	0.0, 7.5, 15.0 and 22.5 dB
Output Signal Range	Up to 3,000 feet (914.4 meters)	Up to 6,000 feet (1,828.8
	over 22 AWG wire	meters) depending on cable
		characteristics
Span Power	60 mA, ±140 VDC maximum	Up to 8 or 16 watts
Streaker Module
Internal Batteries	4 AAA 1.5 volt (6 VDC)	Mounted on PCB
Jack Type	Bantam
System Input Voltage Range	–42.5 to –56.5 VDC
	–48 VDC nominal
TAU Module
DS1 Jack Access Jack Type	Bantam
Electrical Interface	Bipolar
Impedance	100 ohms nominal
Line Code	AMI or B8ZS	Controlled by front panel switch
Line Rate	1.544 Mbps ± 130 ppm max.
		(continued)

2-253

© 2000, ADC Telecommunications, Inc.