ADC Broadband System 296

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

											TAD-104
											Page 8 of 11

L1	L1	L2	L2		L3		L3		L4		L4
EQ ON	EQ OFF	EQ ON	EQ OFF		EQ ON		EQ OFF		EQ ON		EQ OFF
1	2	3		4		5		6		7	8

D1	D1	D2	D2		D3		D3		D4		D4
IS	OOS	IS	OOS		IS		OOS		IS		OOS
9	10	11		12		13		14		15	16

D1 LCL	D1 LCL	D2 LCL	D2 LCL		D3 LCL		D3 CLC		D4 LCL		D4 LCL
LPBK	LPBK	LPBK	LPBK		LPBK		LPBK		LPBK		LPBK
ON	OFF	ON	OFF		ON		OFF		ON		OFF
17	18	19		20		21		22		23	24

D1 RMT	D1 RMT	D2 RMT	D2 RMT		D3 RMT		D3 RMT		D4 RMT		D4 RMT
LPBK	LPBK	LPBK	LPBK		LPBK		LPBK		LPBK		LPBK
ON	OFF	ON	OFF		ON		OFF		ON		OFF
25	26	27		28		29		30		31	32

D1	D1	D2	D2		D3		D3		D4		D4
AMI	B8ZS	AMI	B8ZS		AMI		B8ZS		AMI		B8ZS
33	34	35		36		37		38		39	40

L1	L2	L3	L4		SW TI		SW TO		L1		L1
RESET	RESET	RESET	RESET		LSW		LSP		PROT		UNPROT
41	42	43		44		45		46		47	48

L1	L1	L1 CL
APS	APS	APS
ENAB	DIS	LOCK
49	50	51		52		53		54		55	56

											ATT
											RESERVED
57	58	59		60		61		62		63	64

Note: Bit definitions for High Speed (HS) or MUX (MX) modules are not significant when the MPU is installed in the Soneplex Loop Extender chassis.

Note: Command Displays 3, 4, 5, 6, 7, and 8 are the same as display 2 except for the DS1 signal numbers and chassis slot numbers. One group of four mounting slots is displayed on each command display.

Figure 104-4. Command Displays 2 through 8

2-273