ADCP-90-216

Issue 2, January 1998

Table 1. Splice Module Specifications

 

 

FEATURE

SPECIFICATION

 

 

Dimensions

 

Height

7 in. (17.78 cm)

Width

17 in. (43.18 cm)

Depth

11 in. (27.94 cm)

Mounting

19-inch or 23-inch rack

 

 

Splice Details

 

Splice Drawers

6

Splice Trays

12 (One or two splice trays per drawer)

Catalog Number:

Splice Chip Type:

FST-F3DF-FT

Bare Fusion

FST-F3DF-HS

Heat Shrink Fusion

FST-F3DF-MT

Mechanical (Elastomeric)

FST-F3DF-RT

Rotary

FST-F3DF-3M

FibrLok

FST-F3DF-NT

Qpak

FST-F3DF-RC

Raychem

FST-F3DF-HS18

Heat Shrink Fusion (18 splices)

FST-F3DF-HSAC

AOFR Clip

Splice Capacity

144 splices (12 splices per splice tray)*

 

 

Cable Clamp Kits

 

IFC/OSP Cable Clamp FL2-ACC007

Outside diameter 0.5-0.8 in. (13-20 mm)

 

 

* Except where otherwise noted.

A. Chassis

4.02The splice module chassis is constructed of heavy gauge aluminum and has a baked powder paint finish. The module is compatible with the 7-inch FDS connector module. Cable access holes at the left and right side of both modules provide IFC or OSP cable fiber access. Fiber access holes in the top and bottom of both modules permit protected routing of pigtails to a connector module mounted either above or below the splice module.

B. Front and Rear Covers

4.03A transparent front cover, hinged at the bottom, protects the fibers and pigtails from normal activity near the module. The circuit designation labels provided are to be attached to the front of each splice drawer. Circuit identification can be written on labels and attached to the designation cards. The front cover can be removed for convenience and protection during installation or other activity. The metal rear cover is hinged at the bottom and is removable. The removable cover provides access to the interior of the chassis for fiber activity.

Page 6

©1998, ADC Telecommunications, Inc.