ADCP-90-216

Issue 2, January 1998

4.If applicable, remove the vertical cable guide from each side of the frame position in which the splice module is being installed.

5.Place the splice module in its assigned position in the frame.

6.Insert two #12-24 screws supplied through the mounting bracket at each side of the chassis and in the frame as shown in Figure 4.

7.Install optional vertical cable guides or reinstall the removed guides (see Figure 5).

8.Re-attach the front cover.

FRAME

#12-24 SCREW

(2 PLACES - BOTH SIDES)

INTERBAY

MOUNTING

BRACKET

MANAGEMENT

 

PANEL

1216-A

 

Figure 4. Splice Module Installation in an Equipment Rack

Page 8

©1998, ADC Telecommunications, Inc.