ADC P-90-216 14

ADCP-90-216

Issue 2, January 1998

6.07Coil the service loop clockwise (if the fiber entry is from the right) or counter-clockwise (if the fiber entry is from the left), around the radius limiters in the splice drawer. Avoid twisting the service loop when coiling around the radius limiters.

6.08Place the splice tray in the center of the drawer and push the drawer into the chassis.

6.09Record the cable fiber identification on the designation label attached to the front cover.

6.10Repeat steps 6.02 through 6.09 for additional splice trays as required.

7. SYSTEM INTEGRATION SERVICES

7.01ADC offers the following system integration services. For calls originating in the U.S.A. or Canada, dial 1-800-366-3891, extension 3000. For calls originating outside the U.S.A. or Canada, dial 612-946-3000.

Technical Assistance Center	•	Product Management
	•	Project Engineering
	•	Project Administration
	•	Network Design
	• Broadband Design (RF Design and Strand Mapping)
	•	Integration Network Testing
	• Network Monitoring (Upstream or Downstream)
	•	Power Monitoring
	•	Remote Surveillance
	• System Turn-Up and Test
	•	Service/Maintenance Agreements

Technical Training	•	Product Technology
	•	Custom Designed Training

Technical Operations	•	Detail Engineering
	• End-to-End Installation
	•	Drafting Services

Page 14