ADC P-90-216 manual 13

ADCP-90-216

Issue 2, January 1998

6. SPLICING

6.01The splice module accommodates most splicing methods which should be performed in accordance with local practices. The splice tray splice chip should be selected to match the local splice method.

6.02Open the drawer and remove the splice tray while carefully uncoiling the service loop.

6.03Secure the fiber bundles to the splice tray with tie wraps as shown in Figure 9. The tie wraps should secure the protective sleeve or jacket but must not pinch the fibers.

6.04Route the fibers on the splice tray as shown in Figure 9. The routing in the splice tray is dependent on the fiber entry direction (either from the left or the right).

6.05Splice using local practice.

6.06When splicing is complete, snap the protective cover on the splice tray.

	SPLICE			SPLICE			250 μ
					CHIP
900 μ			SPLICE
		TRAY				FIBERS
FIBERS

3576-B

		CABLE
IFC/OSP	PIGTAIL	TIES
	BUNDLE
FIBER

Figure 9. Fiber Routing in Splice Tray

Page 13

© 1998, ADC Telecommunications, Inc.