The proper fuse values are:
Before attempting to replace a failed fuse, be certain to unplug the AC Power Cord from the AC wall outlet to prevent possible electrical shock. Replace the AC fuse only with one identical in type and rating as printed on the rear panel.
DO NOT USE ANY SUBSTITUTE FUSES WITH DIFFERENT RATINGS OR VALUES. Failure to observe this precaution may cause serious damage to the amplifier circuits, may create a hazard fire, and may void the warranty.
If the Power LED does not glow, it may be an indication that the AC fuse has blown. If you are using the 12V DC Triggering feature it may be
possible that there is a problem with that connection. To determine if the problem is caused by a malfunction in the 12V DC system, remove the small plug inserted into the I2V DC Triggering jack. Press the front panel power switch to turn off the amp, and immediately
Fuse Replacement
Since the fuse has a ceramic body and you cannot visually examine the fuse element, it is suggested that you replace it with an identical substitute or bring the fuse to your ADCOM dealer so they may check its integrity.
[11] AC Power Cord
The AC cord provides power to operate all the
ADCOM